|
CHEETAH MOUNTS PLASMA LCD TV ARTICULATING DUAL ARM WALL MOUNT FOR 32-63" DISPLAYS UP TO 180LBS BLACK | 
 enlarge
| Brand: Cheetah
Category: CE
List Price: $360.00
Buy New: $148.92
You Save: $211.08 (59%)
Rating:  10 reviews
Shipping Weight (lbs): 38
Dimensions (in): 37 x 5 x 12
MPN: APDAM2B
Model: APDAM2B
EAN: 8548621214571
ASIN: B000WL6YY8
Availability: Usually ships in 1-2 business days
| |
| Features:
| • | VERY SUBSTANTIAL MOUNT, OVER 30LBS OF STEEL | | • | DUAL ARMS EXTEND TO OVER 20" FOLD TO LESS THAN 5" | | • | 120 DEGREE SWIVEL, +-15 DEGREE TILT | | • | UNIVERSAL DESIGN FITS MOST 32-63" DISPLAY UP TO 180LBS | | • | INSTALLATION MANUAL AND ALL HARDWARE INCLUDED |
|
| Similar Items:
|
| Editorial Reviews:
Product Description
This is a very substantial mount with Dual arms and over 30lbs of steel. The arms extend over 20" from the wall yet fold to less than 5". Even at full extension, this mount has very little sag or twist. It is rated for up to 180lbs and most displays 52" and smaller weigh under 100lbs. The unit has 4 tilt adjustment knobs and two tilt adjustment screws and it will tilt forward or back 15 degrees. The wall plate is over 19" wide and has wide slots making it easy to mount into standard 16" studs even if they are not exactly 16" apart. The TV plate is 32" wide and the arms fold outward when pushed up against the wall. Thus, the TV plate and possibly the arms may be visible on the sides of 32" units. The universal design will fit any display with a hole pattern up to 26.3" wide and 18" tall. The wall plate is 1/8" thick and very stable and includes a large center hole for cable pass-though into the wall. This mount will swivel approximately 120 degrees depending on the size of your display. Installation instructions and hardware included.
|
| Customer Reviews: Read 5 more reviews...
It was ok December 26, 2008
Lucinda Neel (Carrollton, TX United States)
0 out of 1 found this review helpful
The unit itself is very sturdy. I feel very safe moving it away from the wall. My only problem is after we made sure everything was level and mounted it, we found out that the arms are not level. The plate was level, but the arms were slightly off. Needless to say that was very frustrating after we went to such amounts to make sure it was 100% level. Yes we did try to tighten everything but it still did not correct the problem.
 Good function, but limits to placement December 26, 2008
Rosen
3 out of 3 found this review helpful
I like the price and functionality of the mount, but the bracket placement limits where you can hang the mount. The holes are built exactly for 16" studs with no variance. Would work fine if hanging on a blank wall and you could pick the location, but is limiting if you have an exact place in mind. Need more options for bracket placement.
Heavy Duty, but the quality of hardware is poor December 22, 2008
Alan White (Missouri)
1 out of 1 found this review helpful
This mount is heavy at 38lbs and seems sturdy, but the mounting bolts, bushing, rods and hardware are of extreme poor quality. The machining and fit and finish is also poor. I mounted a 58" Plasma TV weighing 138 lbs and there was so much twist and sag that I was concerned that the mount would hold my TV. One of the pivot rods and bushing even fell out while the TV was sitting on the bracket because the rod was too short and only about one thread was holding. The dual pivot arms is a good design and I liked the way it can be pulled out from the wall to get to cables. So, I went to the hardware store and purchased new bolt and some washers to rebuild the mount using solid hardware. This worked out well and reduced the sag and twist to almost nothing. Another problem was the tilt feature. It is very difficult and get the center bolt and the 2 adjustment knobs tight enought to prevent the TV from slipping and tilting fully down. I would only recommed this mount for smaller TVs or for someone that wants to replace the mounting hardware.
 Great wall mount December 3, 2008
Allan Johnston (Colorado)
2 out of 2 found this review helpful
When I received this mount I could hardly believe how much it weighs. 38# of steel that allows me to manuver the tv all over the place. The design allows the tv to be moved out, side to side, and swiveled to almost 90 degrees. Great preoduct!
Excellent price; rugged product November 30, 2008
E. Thaxton (Boston, MA)
3 out of 3 found this review helpful
Used this mount for a 52" LCD wall mount. It was simple and rugged. The price was far lower than competing mounts. The arms move smoothly, and it articulates through an excellent range from the wall and wide angles at any range. I am extremely pleased with the mount.
The only negative feature is that the arm-mechanism is a little heavy 25-30 lbs, making mounting it a little more than just "cake". I set the arms on my shoulders, where it balanced reasonably well, and then screwed it to the wall.
|
|
|
Powered by Associate-O-Matic
| |
